AdTEC | AT-cPCI-PMC/XMC-CAR
350784
single,single-product,postid-350784,eltd-cpt-1.0,woocommerce,woocommerce-page,columns-3,,ajax_fade,page_not_loaded,moose-ver-1.1.1, vertical_menu_background_opacity, vertical_menu_with_scroll,smooth_scroll,woocommerce_installed,blog_installed,wpb-js-composer js-comp-ver-4.7.4,vc_responsive
, , , ,

AT-cPCI-PMC/XMC-CAR

  • 3U compactPCI carrier for one PMC card or 1 XMC card (PCIe 4 Lane Interface and I/O’s)
  • Transparent Operation
  • 64 bit/66 MHz without user IO or 32 bit /33 MHz/66 MHz with User IO
  • Supports 3.3V signaling
  • Rear and front panel I/O access (depending on style)
  • Rear IO JTAG connectivity
  • Air- cooled and Conduction-cooled (depending on style)
  • Extended temperature -40°C to +85°C
  • Optional conformal coating

This card is XMC or alternatively PMC extension Card for 3U cPCI computer systems. This card provides an easy and low cost solution that enables use of a PMC mezzanine I/O card or an XMC card in a Standard 3U cPCI computer system. The carrier card acts either as an adapter to route PCI bus signals to and from the PMC card through the cPCI card slot connector or an XMC.3 card adapter, which allows up to 4 lanes PCI Express XMC card to be used in a cPCI card slot connector. The XMC card is VITA 42.3 compatible and supports X4 PCI Express lanes. The PCI Express interface supports 1 or 4 lanes to the XMC card XMC cards add two high-density, high-speed connectors designated J15 (primary) and J16 (secondary). Each connector contains 114 pins. On the J15 primary connector, high-speed differential Tx/Rx signals, along with 3.3V power, ground, I2C, JTAG, reset and presence signals. On the J16 secondary connector, 20 high-speed differential pairs are defined, along with grounds and 38 user-defined pins for additional I/O.

 

The XMC Card is completely transparent to all cPCI operations through a PCI to PCI express bridge (PLX-PEX8114). The bridge enumerates as a standard PCI device and provides direct transparent accesses to the XMC card. The simple two port device is equipped with a standard PCI Express port that scales X1, X2, or X4 lanes in width giving an effective bit rate scaling from 2.5 to 10Gbps. LED lane indicators provide lane status during operation. The XMC card supports PCI Express link with four lanes on primary XMC connector and IO’s on secondary XMC Connector. The board detects automatically whether an XMC or a PMC is plugged through present LED indicators. The PMC slot can be used for 32/64 bit and 33/66 MHz PMC cards. The combination carrier plus PMC card enables the integrator to build modular systems based on a variety of off-the-shelf standard PMC boards. Field I/O signals are routed through the carrier card’s rear J2 connector. Refer to the Rear and front panel options for PMC card. The voltage keying for cPCI carrier and its PMC site is 3.3V.

 

This card is available in Air-Cooled and Conduction-Cooled version. The conduction-cooled version of the cPCI carrier card addresses the needs of aerospace, military and rugged applications. It contains a thermal heat frame. An aluminum ring or plate can fit together with conduction-cooled PMC cards. Conduction cooling conducts heat away from the hot spots of the board and transfers the heat to the card edges and to the system chassis. No active ventilation is necessary inside the system, which means the boards are sealed from the environmental influences found outside of the chassis. This unit is ideal for airborne systems, deployment in battleground equipment, and other situations with advanced thermal management requirements. This conduction-cooled carrier card interfaces a PMC card to a cPCI computer system. The conduction-cooled version does not include a standard front panel. Only air-cooled version includes a standard front panel. The card is optionally available with a conformal coating layer.

Mezzanine Slots
One PMC Slot
32bit, 33 MHz or 66MHz
64bit, 33 MHz or 66 MHz
 
XMC Slots
PCI Express link upto 4 lanes (X4, X2, X1)
Compliant with XMC standard VITA 42.3-2006
PCI Express link upto 4 lanes on J15 Connector (Primary)
64 I/O’s on J16 connector (Secondary)
 
cPCI Bus
Compliance to cPCI Core Specification PICMG 2.3 R1.0
Peripheral Slot
V(I/O): +3.3V
 
cPCI coding key
Complies with IEC 61076-4-101
Default No key
3.3V keying
 
PMC Voltage Key
Complies with PMC standard keying P1386
Default no key
3.3V keying
 
Rear and Front Panel I/O Options

Front Panel Rear I/O 64bit PCI
Yes No No
Yes J14/J2 No
Yes J14/J2 J13/J2

The options depend on styles
 
Styles

A C
Front Panel Y N
Front Stiffener N Y
Middle Stiffener N Y
Parts soldered Y Y
Extended Temperature Y Y
Conformal Coating N Y
Conduction-cooled N Y

 
LED’s & Test Points
Power indicator LED’s
Green PCIe lane indicator LED’s and Card present indicator LED’s
Test points for 5V, 3.3V, +12V, -12V and VIO plus two test points for ground
 
Power Requirements
Determined by PMC/XMC card used
 
Electrical Specifications
Supply voltage/power consumption:

  • +12V (-5%/+5%) for XMC and PMC
  • +5V (-5%/+5%) for XMC and PMC
  • +3.3V (-5%/+5%) for XMC and PMC
  • -12V (-10%/+10%) for XMC and PMC

Power supply must be provided from the back plane via the cPCI J1 connector
 
Physical
Physical configuration: 3U cPCI Card 100 x 160mm.
Rear cPCI connectors: 2mm J1 & J2 connectors.
PMC connectors: Four 1mm (Stacking Height of 10mm) connectors.
Conduction-cooled model uses conduction-cooled frame with Wedge locks and Thermo Bars
Air-cooled model uses the standard front panel assembly with PMC bezel cutout
 
Mechanical Specifications
3U, 1 slot wide (100 x 160 x 20 mm)
 
Environmental Specifications Temperature

Air-Cooled Conduction-Cooled
Operating Temperature 0ºC to + 60ºC -40ºC to + 85ºC

 
American National Standard for 2mm Connector Equipment Practice on Conduction-cooled Euro boards: ANSI/VITA 30.1-2002
American National Standard for Conduction-cooled PMC: ANSI/VITA 20-2001(R2005)
 
Humidity
Operating: 5% to 95% (non-condensing)
 
Warranty
1 year limited warranty

AT-cPCI-PMC-XMC-CAR-O