AdTEC | AT-PMC-XMC-Adapter
350765
single,single-product,postid-350765,eltd-cpt-1.0,woocommerce,woocommerce-page,columns-3,,ajax_fade,page_not_loaded,moose-ver-1.1.1, vertical_menu_background_opacity, vertical_menu_with_scroll,smooth_scroll,woocommerce_installed,blog_installed,wpb-js-composer js-comp-ver-4.7.4,vc_responsive
, , , ,

AT-PMC-XMC-Adapter

  • Adapt one XMC.3 (PCI Express VITA 42.3) card to a PMC slot
  • PCI Express x1 lane interface
  • PMC Compliant to IEEE P1386.1 specifications
  • 32 bit /33 MHz/66 Mhz
  • Three 64 pin PMC connectors
  • Two 114 pin XMC connectors
  • Supports 3.3V PCI signaling
  • Selective Active signal equalization and compensation for robust operation in any personal computer
  • IEEE 1384 XMC mechanicals
  • Transparent operation
  • Standard XMC card size (143.75 mm x 74 mm)
  • Conduction cooling (VITA20) for card
  • Optional conformal coating

The PMC to XMC adapter allows XMC card to be used in a PMC slot. The XMC site is VITA 42.3 compatible and supports a single (X1) PCI Express lane. The product will work with 33 MHz and 66 MHz clock speeds and with 32-bit bus width. Appears transparent to the system, hence no additional drivers are required for operating the adapter. The carrier card acts simply as an adapter to route PMC bus signals to and from the XMC card. All AT’s XMC cards and those from other vendors are supported. This card is well suited for enterprise router/switch/gateway providers and system integrators. The carrier is optionally available with a conformal coating layer.

 
Software
No software required
 
Applications
Add XMC cards to standard PMC slots
Custom interfaces to XMC P16
Multi-card system synchronization and control

Mezzanine Slots
One PMC Slot
32bit, 33 MHz or 66MHz
 
XMC Site
XMC Compliant to VITA 42.3
 
PMC Compatibility
PMC compliant as per the IEEE 1386 specification
 
Physical
Standard Singlewide XMC (143.75 mm x 74 mm)
 
Environmental
Operating Temperature: -40ºC to +85ºC
Storage Temperature: -55ºC to +100ºC
Relative Humidity: 5% to 95% (non-condensing)
 
Power
Supply +5V, +3.3V, +12V and -12V from PMC Connectors are used
An on-board voltage regulator is used to generate 1.5V
 
Software Interface
No software set-up required by PMC to XMC adapter
 
Warranty
1 year limited warranty

AT-PMC-XMC-Adapter-O