AdTEC | AT-XMC-GRA
350826
single,single-product,postid-350826,eltd-cpt-1.0,woocommerce,woocommerce-page,columns-3,,ajax_fade,page_not_loaded,moose-ver-1.1.1, vertical_menu_background_opacity, vertical_menu_with_scroll,smooth_scroll,woocommerce_installed,blog_installed,wpb-js-composer js-comp-ver-4.7.4,vc_responsive
, , , ,

AT-XMC-GRA

Based on Fujitsu’s MB86298 ‘Ruby’ Graphics Processing Unit
512MB of on-board DDR2 Memory
OpenGL ES 2.0 compliant
PCIe – x1 PCI-Express (PCIe base specification 1.0a) Interface
2D/3D graphics engine
Two display controllers with display resolutions of 1280×1024 or 1600×600
Four Independent Video Capture input channels

  • Two DVI-D inputs
  • One Analog RGsB input
  • One CVBS/S-Video/Component-Video (NTSC/PAL/SECAM) input

 
Component and Composite Video Capture
Two Independent Video Output Channels to connect standard monitors
Provision for 24bit RGB Digital Output
Independent Video Overlay of 8 layers on each display controller
Air Cooled and Conduction cooled versions
Driver and OpenGL support for Windows Xp, Linux 2.6.x, WindRiver VxWorks, Green Hills INTEGRITY, and their safety critical variants (Wind River 653, Green Hills INTEGRITY- 178B)

The AT-XMC-GRA is a new dual display graphics module providing a versatile, high performance graphics subsystem featuring high speed switched XMC Mezzanine module for Graphics solutions with PCIe as the bus interface. Using MB86298 ‘Ruby’ Graphics controller from Fujitsu, the module enables these systems to take full advantage of Fujitsu’s advanced graphics technology. A ruggedized, high-performance, low power dissipation, flexible and many more features make this card ideal for use in various high reliability embedded systems. These high-density high-performance cards are suitable for applications ranging from test equipment to rugged deployable systems. The AT-XMC-GRA module supports two independent high-resolution dual screen displays, each either VGA or DVI-D. The Module supports two DVI-D outputs and two Analog VGA outputs on P16 Connector. Two micro-HDMI connectors with DVI interface and VGA connectors may optionally be installed in the front panel area for development use. This module plugs into a standard XMC site on any compatible carrier and drives two independent displays through the full-size DVI-I and VGA ports on its front panel. Displays can have independent refresh rates, resolution and color control, offering great flexibility.

 
Hardware

The MB86298 ‘Ruby’ Graphics Display Controller combines high-performance New 2D/3D graphics engine with a general-purpose, programmable Unified Shader including support for the OpenGL shading language with a shading language compiler (SL Compiler) with an integrated DDR-2 SDRAM controller and a high speed x1 PCI-Express communications link. The GPU has two display controllers with maximum resolution of 1280 x 1024 or 1600 x 600 pixels with 8 layers of overlay per display controller. 4 alpha planes, either a constant alpha value or alpha from pixel data are available for blending on each layer. Four independent Video capture channels supporting SD video input with embedded syncs according to the ITU-R BT.656 standard, PAL and NTSC resolutions and frame rates, HD video input 720p progressive format according to the SMPTE 296M standard (50 and 60Hz frame rates) and DRGB888 type video input with dedicated sync signals are also available. The Module supports two DVI-D inputs from P16 Connector, RGsB (sync on green) input and one analog interlaced input PAL (CCIR/STANAG B) / NTSC (RS-170A/STANAG -C) composite video / S-VIDEO / Component Video. Optional 24bit RGB [888] output for direct digital interface to standard LCD modules. A combination of an intelligent board along with this module provides for a ready solution to build Rugged Smart Multi Function Display systems. All logic functionality on-board the module are implemented through an FPGA device. The FPGA is used as an I2C master to alternatively configure and control peripheral video processing devices. It also interfaces to GPIO’s for interrupts and SPI Debug Interface from Ruby controller.

 
Software

AT-XMC-GRA drivers are available for Windows XP/7, Linux 2.x running on Intel x86 platforms. Embedded graphics driver support including OpenGL ES 2.0, DO-178B Level A support is provided through Altsoft. Support for VxWorks 6.x, Integrity, VxWorks653 (Safety Critical) is also available.

 
Applications

  • Military / Aerospace
  • Industrial Control and Instrumentation
  • Telecom / Datacomm
  • Medical Imaging
  • Embedded test systems
  • Rugged deployed systems
  • Demanding requirements
  • Avionics upgrades and retrofits

Bus Interface
XMC – x1 lane PCIe, 2.5Gbps (PCIe base specification 1.0a)
 
Graphics Controller
MB86298 ‘Ruby’ Graphics Display Controller
Two independent display engines
Multi-display capability (this lowers the maximum available resolution, color depth and refresh rate)
OpenGL ES2.0 compliant
2D/3D graphics engine
Display resolutions of 1280 x 1024 or 1600 x 600
Two display controllers with display resolutions of 1280×1024 or 1600×600
24-bit color
Independent Video Overlay of 8 layers on each display controller
PCI Express interface
512MB of on-board DDR2 Memory
 
Video Inputs
Two DVI-D inputs
One RGsB (Sync-on-Green) video input
One Analog Interlaced PAL/NTSC/S-Video/Component Video Input
All Video inputs on P16 Connector
 
Video Outputs
Two DVI-D outputs
Two Analog VGA outputs
All Video outputs on P16 Connector
Optional 24bit Digital RGB [888] output
Optional Front panel VGA connectors and micro-HDMI connectors for DVI-D
 
Memory
512MB of on-board DDR2 Memory
 
Software
Drivers for Windows XP/windows7, Linux
OpenGL ES 2.0 from Altsoft
Other multi OS/RTOS support
Driver and OpenGL support for Windows XP, Linux 2.6.x, WindRiver VxWorks, Green Hills INTEGRITY, and their safety critical variants (Wind River 653, Green Hills INTEGRITY-178B)
 
Physical
Standard XMC Card Size (143.75mm x 74mm)
Complaint to IEEE 1386.1
10mm Stacking Height
Conduction Cooled XMC without Bezel
 
Environmental
 

Air-Cooled Conduction-Cooled
Operating 0ºC to + 60ºC -40ºC to + 85ºC

 
Power
Primary Supply +3.3V from XMC Connectors (P15), all other voltages internally derived
 
Warranty
1 year limited warranty

AT-XMC-GRA-O