Carrier / Adapters Products - AT-PMC-XMC-Adapter

	Adapt one XMC.3 (PCI Express VITA 42.3) card to a PMC slot
	PCI Express x1 lane interface
	PMC Compliant to IEEE P1386.1 specifications
	32 bit /33 MHz/66 Mhz
	Three 64 pin PMC connectors
	Two 114 pin XMC connectors
	Supports 3.3V PCI signaling
	Selective Active signal equalization and compensation for robust operation in any personal computer
	IEEE 1384 XMC mechanicals
	Transparent operation
	Standard XMC card size (143.75 mm x 74 mm)
	Conduction cooling (VITA20) for card
	Optional conformal coating

The PMC to XMC adapter allows XMC card to be used in a PMC slot. The XMC site is VITA 42.3 compatible and supports a single (X1) PCI Express lane. The product will work with 33 MHz and 66 MHz clock speeds and with 32-bit bus width. Appears transparent to the system, hence no additional drivers are required for operating the adapter. The carrier card acts simply as an adapter to route PMC bus signals to and from the XMC card. All AT�s XMC cards and those from other vendors are supported. This card is well suited for enterprise router/switch/gateway providers and system integrators. The carrier is optionally available with a conformal coating layer.

Software

No software required

Applications

	Add XMC cards to standard PMC slots
	Custom interfaces to XMC P16
	Multi-card system synchronization and control

Mezzanine Slots

	One PMC Slot
	32bit, 33 MHz or 66MHz

XMC Site

XMC Compliant to VITA 42.3

PMC Compatibility

PMC compliant as per the IEEE 1386 specification

Physical

Standard Singlewide XMC (143.75 mm x 74 mm)

Environmental

	Operating Temperature: -40�C to +85�C
	Storage Temperature: -55�C to +100�C
	Relative Humidity: 5% to 95% (non-condensing)

Power

	Supply +5V, +3.3V, +12V and -12V from PMC Connectors are used
	An on-board voltage regulator is used to generate 1.5V

Software Interface

No software set-up required by PMC to XMC adapter

Warranty

1 year limited warranty